MARIVA POWER Water Filter with Pump
A water filter with a pump, a 100 GPD membrane and an 8-litre tank, for flats with low water pressure. Even when the pressure is weak, the pump sends enough water to the membrane.
₺6,200Installation included
- We speak English
- Filter replacement from 1200 TL
- Free home visit and installation
- 2-year warranty on new systems
- Same day in central districts

Why do you need a pump?
A reverse osmosis membrane filters water under pressure. If the mains water pressure is low, less water gets through the membrane, the tank fills slowly and a larger share of the water goes down the drain as waste. A pump pressurises the water before it reaches the membrane, so the system works properly even at low pressure.
Pressure can be low on the upper floors of older buildings, in complexes with a weak pressure booster set and in homes at the far ends of the mains network. We measure the pressure during the home visit and tell you whether a pump is needed. We cover choosing a pump in more detail here: Water filter with or without a pump?
Technical specifications
| Tank | 8-litre steel storage tank |
|---|---|
| Membrane | 100 GPD reverse osmosis |
| Operation | With pump |
| Filtration | 5 stages |
| Power | Requires a socket under the sink |
| Installation | Under-sink |
Power and noise
The pump runs from an adapter, so you need a power socket under the sink. It only runs while the tank is filling and stops once the tank is full. You may hear a faint hum while it runs; with the cupboard door closed, it usually goes unnoticed.
How it differs from the model without a pump
The model with a pump has a 100 GPD membrane, which filters roughly 380 litres a day under ideal conditions. The tank is the same size, so the amount of water kept ready does not change; what changes is how quickly the tank refills. If your pressure is good, the 8-litre model without a pump is the more economical choice.
Installation and price
Installation is free and in the central districts usually takes place on the same day. MARIVA POWER costs ₺6,200, installation included. We'll confirm current stock by phone or WhatsApp.
To book an appointment for this model, open the quote form; the model is added to the form automatically.
If you already have a system without a pump and your only problem is pressure, a pump can be fitted without replacing the system; we compare the options in our article Can you add a pump to a water filter?
Questions about the MARIVA POWER
Is a system with a pump noisy?
The pump only runs while the tank is filling and makes a faint hum. With the under-sink cupboard closed, you usually cannot hear it.
Will I still get water during a power cut?
The water stored in the tank keeps flowing from the tap. When the power comes back, the pump refills the tank.
When is a pump essential?
If the pressure we measure during the home visit is low, or the tank fills very slowly, we recommend a model with a pump.
Other models and guides
- MARIVA CLASSICA quiet, economical model for homes with good water pressure.
- MARIVA CLASSIC XLA larger-tank model that keeps more filtered water ready to use.
- MARIVA POWER XLA large tank and a pump in one; our most popular model.
- Compare all modelsSee the differences in tank, membrane and pump in one table.
- Filter replacementPrices from 1200 TL and replacement intervals.
- How to choose a water filterSeven questions to answer before you buy.
Free home visit for the MARIVA POWER
We'll look at your home and water pressure and help you choose the right model. Installation is free.

