MARIVA CLASSIC Water Filter without Pump
A quiet under-sink water filter with an 8-litre tank and no pump, for homes with good mains water pressure. It uses a 75 GPD reverse osmosis membrane and needs no power socket.
₺4,200Installation included
- We speak English
- Filter replacement from 1200 TL
- Free home visit and installation
- 2-year warranty on new systems
- Same day in central districts

Who is it for?
It covers the daily drinking and cooking water for a household of 2–4 people. Because it filters water using mains pressure alone, your building needs good water pressure. If water flows strongly when you turn on the tap and there are no pressure complaints on your floor, a model without a pump is enough. If the pressure is weak, look at the 8-litre model with pump, which has the same tank size.
With no pump, it runs silently and does not need to be plugged in. Servicing comes down to replacing the filters; there is no pump that could fail and add to the cost.
Technical specifications
| Tank | 8-litre steel storage tank |
|---|---|
| Membrane | 75 GPD reverse osmosis |
| Operation | Without pump, runs on mains water pressure |
| Filtration | 5 stages |
| Power | Not required |
| Installation | Under-sink |
How much water does it filter per day?
GPD is the number of gallons a membrane can filter in a day. 75 GPD is roughly 284 litres, but that figure is measured under ideal conditions. At home the real amount is lower, depending on mains water pressure and water temperature. The system stores the filtered water in its 8-litre tank; when you open the tap, the water comes from the tank, and the system refills it as it empties.
Filter stages
In a five-stage system, water is usually filtered in this order:
- A sediment filter traps sand, rust and sediment.
- Granular activated carbon reduces the taste and smell of chlorine.
- A carbon block captures remaining chlorine and organic matter and protects the membrane.
- The reverse osmosis membrane removes most dissolved salts and limescale.
- A post-carbon filter polishes the taste of the water stored in the tank before it reaches the tap.
Installation and filter replacement
Installation is free. In Kepez, Muratpaşa, Konyaaltı, Aksu and Döşemealtı we usually install on the same day. Pre-filters are replaced every 6 months on average and the membrane every 12–18 months, and we call you when they are due. Filter replacement starts from 1200 TL.
Price
MARIVA CLASSIC costs ₺4,200, installation included. We'll confirm current stock by phone or WhatsApp. There is no charge for the home visit or installation. New systems come with a 2-year warranty.
To book an appointment for this model, open the quote form; the model is added to the form automatically.
Questions about the MARIVA CLASSIC
How many people is an 8-litre tank enough for?
In most homes it is enough for a family of 2–4. If you are a larger family or also use filtered water for cooking, the 12-litre model is a more comfortable choice.
Does a system without a pump use electricity?
No. The model without a pump runs on mains water pressure and is not plugged in.
How do I know if my water pressure is high enough?
We measure the pressure during the home visit. If your tap flows weakly or you live on an upper floor, you may need a model with a pump.
Other models and guides
- MARIVA CLASSIC XLA larger-tank model that keeps more filtered water ready to use.
- MARIVA POWERA model with a pump that works well even at low pressure.
- MARIVA POWER XLA large tank and a pump in one; our most popular model.
- Compare all modelsSee the differences in tank, membrane and pump in one table.
- Filter replacementPrices from 1200 TL and replacement intervals.
- How to choose a water filterSeven questions to answer before you buy.
Free home visit for the MARIVA CLASSIC
We'll look at your home and water pressure and help you choose the right model. Installation is free.

